IWC released three new Ingenieur Chronograph Special Replica watches last year to commemorate the 74th anniversary of the annual Goodwood Member’s Meeting, a weekend-long vintage racing event.
When these three watches were unveiled last year, they also heralded a new look for IWC’s Ingenieur Fake Watches. Gone are the integrated lugs, crown protectors, and angular lines inspired by the earlier Ingenieur watches designed by the legendary Gerald Genta. Instead, the new Ingenieur Chronograph features a more classically-styled and restrained case design that has more in common with the very first Ingenieur watches from the ’50s.
Case diameter is a relatively modest 42mm, which isn’t too large as far as modern watches go. Most sport chronographs tend to be around 44mm and above these days, so the slightly smaller size of these new IWC Ingenieur Chronograph Special Replica Watches UK is bound to delight readers who love more moderately sized watches. Unfortunately, at slightly over 15mm, the case is still quite thick, a malady that afflicts many modern sport chronographs. On the bright side, this, along with the chunky crown and chronograph pushers, ensures that these special edition Ingenieur Chronograph watches have considerable wrist presence.
On the inside, these new Ingenieur Chronograph Special Edition watches will be powered by IWC’s in-house Caliber 69370. This movement was specifically developed to replace the Valjoux 7750 used in entry-level IWC chronograph Copy watches. As a result, the Caliber 69370 shares the same dimensions as the Valjoux 7750, but with two notable improvements. It features a column wheel instead of a basic cam, and has a more efficient winding system. Power reserve is 46 hours and the dial configuration is similar to the Valjoux 7750, with sub-dials at 12, 9, and 6 o’clock as well. The key difference, however, is that the running seconds of the Caliber 69370 is at 6 o’clock rather than 9 o’clock. The movement is nicely finished and can be admired through a sapphire display case back.
The most exclusive of the three is the Ingenieur Chronograph Edition “74th Members’ Meeting at Goodwood.” It features a red gold case and a black dial with red gold accents. The tachymeter scale, which sits on the chapter ring, as well as the markings for the sub-dials, have prints in rose gold. The hour markers are also quite unusual in the sense that they are made up of a lume dot and an applied stick marker. Both are red gold and applied with luminescent material. Time is easily read off the thick baton-style hands, which are also applied with lume.
To distinguish the running seconds hand from the chronograph registers, the running seconds hand is a solid red arrow hand. The hands for the chronograph seconds hand as well as the 12-hour and 30-minute registers are red gold with red tips. Speaking of the 12-hour and 30-minute registers, the last 2 hours and 5 minutes of each respective register is marked in red. This makes the registers look like the fuel gauges of race cars, which turn red as the Swiss Made Watches tank nears empty. There’s an unobtrusive date window at 3 o’clock, which features a black date wheel so that it stands out less from the dial and rose gold fonts for the date. Very cool.